How to Measure Size in m²

It is simple to calculate the square metre size of an area.

When measuring rectangular shaped areas. Just multiply the length by the width in metres and you have the answer.

When measuring more complex shapes it is best to divide them into separate rectangles and then add them together to get a total area.

concrete tile sealing and protecting

Concrete Sealer - perth

"Most concrete damage is attributed to surface moisture intrusion"

Unsealed concrete is highly porous. Water, oil and dissolved salts soak in through microscopic capillaries, causing stains, efflorescence, salt attack, mould, mildew and surface erosion over time. A high-quality concrete sealer is essential if you want your concrete driveway, patio, garage floor or polished concrete surface to last and stay looking good.

Today, concrete is no longer just a “warehouse floor.” Polished concrete, honed concrete and exposed aggregate concrete are now popular design choices in homes, shops, cafes, warehouses and showrooms. Polished concrete floors are durable, low-maintenance and eco-friendly – but only when they are properly sealed with a penetrating concrete sealer that protects against stains and moisture.

Deepshield™ penetrating sealers are designed specifically for concrete, pavers and grout, providing long-lasting protection for:

  • Concrete driveways and garage floors
  • Outdoor patios, paths and alfresco areas
  • Honed and polished concrete floors
  • Exposed aggregate concrete and decorative concrete

Deepshield™ protects, beautifies and enhances both indoor and outdoor concrete surfaces while maintaining their natural, non-slip finish.

Deepshield™ Penetrating & Impregnating Concrete Sealer

Deepshield™ Transparent Penetrating Sealer is a fast-curing, premium water-based penetrating/impregnating concrete sealer that:

  • Penetrates deep into porous concrete, pavers and grout
  • Repels water, oil and staining contaminants
  • Is water-based, odourless, non-flammable with no toxic fumes
  • Provides protection for up to 10 years or longer, depending on use and weather conditions

For denser or more highly finished concrete, Deepshield™ GOLD Transparent Penetrating Sealer is our ultra-premium impregnating sealer, based on advanced fluoro-bond technology. It:

  • Penetrates and chemically bonds into very fine surface pores
  • Provides maximum stain protection against water and oil
  • Is also water-based, odourless and non-flammable
  • Can last up to 15 years or longer, depending on surface use and conditions

Sealing is the first critical step in protecting your concrete investment from stains, moisture and premature deterioration. A properly applied Deepshield™ concrete sealer will extend the life of your sealed concrete floor and help it look better for longer.

All DEEPSHIELD® products are available from our Online Store, or from one of the dozens of Accredited Applicators throughout all Perth suburbs

How Deepshield™ Concrete Sealer Works

Deepshield™ penetrating impregnating sealer uses advanced nano-technology to form a long-lasting, invisible barrier inside the pores of the concrete – not on top of it.

  • The active molecules are engineered to penetrate deeply into the concrete’s capillaries.
  • One end of each molecule chemically bonds within the mineral structure of the concrete.
  • The other end remains exposed as a hydrophobic (water-repellent) and oleophobic (oil-repellent) surface inside the pore.

This chemical bond is stronger than the mechanical bond formed by many traditional surface coatings. The treated concrete repels water and oil, but the micro-pores remain open enough for water vapour to escape, keeping the surface breathable.

The result is a breathable, penetrating, non-film-forming concrete sealer that gives powerful stain protection while maintaining the natural appearance and slip resistance of the surface.


Deepshield™ GOLD – Ultra-Premium Fluoro-Bond Technology

Deepshield™ GOLD Transparent Penetrating Sealer uses advanced fluorine chemistry to provide the highest level of protection for concrete, natural stone, tiles and grout:

  • Deep penetrating and impregnating
  • Highly breathable and invisible once cured
  • Excellent resistance to water, oil and stubborn stains
  • Ideal for high-traffic indoor and outdoor concrete surfaces, including polished and honed concrete

Because it forms a strong chemical bond within the pores, Deepshield™ GOLD offers long-term protection (up to 15 years) with correct preparation and maintenance.

Fully Breathable Impregnating Sealer (Breathable Concrete Sealer)

Concrete needs to breathe. Trapping moisture under a non-breathable surface coating can lead to blistering, flaking, peeling and internal damage. That is why it is so important to use a breathable impregnating concrete sealer rather than coating concrete with thick synthetic or urethane films.

Deepshield™ penetrating concrete sealers are:

  • Fully breathable – allow water vapour to escape
  • Penetrating and impregnating – they sit inside the surface, not on top
  • Ideal for concrete, pavers and grout that are exposed to the weather

This helps the slab ventilate and dry out naturally, reducing the risk of harmful moisture build-up inside the concrete.

concrete with water

Water, Oil & Stain Protection for Concrete

Most long-term concrete damage begins with water and contaminant absorption at the surface. Unsealed concrete can readily absorb:

  • Water and dissolved salts (leading to efflorescence and salt attack)
  • Oils, grease and food spills (causing dark, hard-to-remove stains)
  • Mould and mildew (especially in damp, shaded areas)

By sealing with a Deepshield™ penetrating concrete sealer, you create a powerful water and oil repellent barrier that helps:

  • Reduce efflorescence and salt damage
  • Prevent deep oil and food stains
  • Minimise mould and mildew growth
  • Slow down erosion of the concrete surface

Deepshield™ also acts as an effective salt barrier, making it an ideal concrete sealer for saltwater pools, marinas and coastal properties.

non slip concrete floor

Keeps Your Concrete Floors Non-Slip

Because Deepshield™ is a penetrating, non-film-forming sealer, it does not change the slip resistance of the surface. There is no glossy film and nothing for feet or tyres to slide on.

  • Ideal for non-slip concrete floors in wet areas
  • Perfect around swimming pools, driveways and outdoor paths

Sealing your concrete floors with Deepshield™ will keep your non-slip surfaces non-slip.

sealed concrete floor

Non-Film-Forming – Will Not Flake or Peel

Unlike many topical concrete sealers, Deepshield™:

  • Is alkali resistant, odourless and non-film-forming
  • Penetrates into the concrete instead of creating a surface skin
  • Will not flake, peel or turn cloudy
  • Usually does not need stripping before reapplication (once the surface remains porous)

This makes Deepshield™ a low-maintenance option for concrete driveways, industrial floors and high-traffic commercial areas, where film-forming coatings often fail.

All DEEPSHIELD® products are available from our Online Store, or from one of the dozens of Accredited Applicators throughout all Perth suburbs

shiny sealed concrete floor

Pre-Sealing Preparation (Important Before Using Any Concrete Sealer)

  • 1. Clean thoroughly
    Ensure the concrete is clean and dry and looks exactly how you want it to look once sealed. Stains that remain in the concrete before sealing may be impossible to remove afterwards.

  • 2. Remove existing coatings
    Deepshield™ must be applied to bare, absorbent concrete. Wax, paint, acrylic, epoxy and other topical sealers must be fully removed before applying a penetrating sealer .

  • 3. Always test first
    Perform a small test patch in an inconspicuous area at least 24 hours before sealing the whole surface. Check for appearance, absorption and water repellence.

  • 4. Colour enhancement test (if applicable)
    When using Deepshield™ Colour Enhancing Penetrating Sealer, make sure the test area has produced the level of colour enhancement you want before proceeding.

concrete floor after sealing

After Sealing – Maintenance Tips & Advice

    Do's:
  • Clean spills as quickly as possible
  • Use mats at external doorways to reduce dirt and grit
  • Use a microfibre mop and a pH-neutral cleaner for regular cleaning
  • Clean floors regularly to prevent build-up of grime
    Don'ts:
  • Don’t use bleach, ammonia or vinegar on sealed surfaces
  • Don’t use acidic cleaners, abrasive cleaners or scouring pads
  • Don’t leave strong chemicals or heavy oil spills on the surface – clean up promptly

With the right penetrating concrete sealer, correct preparation and simple ongoing maintenance, your sealed concrete driveway, patio or polished concrete floor will look better, stay cleaner and last longer.

Which is the best sealer for concrete?

Choosing the best concrete sealer depends on your surface and the finish you want:

  • Deepshield™ GOLD Transparent Penetrating Sealer – ultra-premium water-based penetrating/impregnating concrete sealer for dense or polished concrete where maximum stain protection and long life are needed.
  • Deepshield™ Transparent Penetrating Sealer – premium natural-look water-based concrete sealer for most concrete driveways, paths, patios and floors.
  • Deepshield™ Colour Enhancing Penetrating Sealer – a slight colour-enhancing penetrating sealer that gently deepens and enriches the existing colours in concrete while still penetrating below the surface.
    • The colour change is intentionally subtle, not dramatic.
    • It does not noticeably change whites, off-whites or pale yellows, as there is little colour to enhance in those shades.
    • It does not create shine, gloss, sheen or a “wet look” film – the surface stays natural; only the existing colour is brought out more.

All three are penetrating, impregnating, water-based concrete sealers designed to protect against water, oil and stain damage without leaving a slippery surface film.

deepshield gold sizes

Deepshield™ GOLD Transparent Penetrating Sealer

Ultra-premium penetrating/impregnating concrete sealer – up to 15 years protection

Deepshield™ GOLD Transparent Penetrating Sealer is our ultra-premium water-based penetrating sealer for concrete. Using advanced fluoro-bond technology, it provides maximum stain protection for up to 15 years or longer, depending on surface usage and weather exposure.

Designed to deeply penetrate denser materials such as polished concrete, burnished or honed concrete, granite and marble, Deepshield™ GOLD chemically bonds inside the pores to create a powerful oil- and water-repellent barrier. It is ideal wherever you need the highest-performing impregnating concrete sealer:

  • Polished or honed concrete floors
  • High-traffic commercial concrete
  • Concrete benchtops, outdoor kitchens and BBQ areas
  • Dense natural stone, tiles and grout

Key benefits:

  • Water-based, fast-curing penetrating sealer – no unpleasant odours, no flammability issues
  • Invisible, natural-look finish – no surface film, gloss or plastic coating
  • Non-slip – does not make concrete more or less slippery
  • Helps prevent staining, efflorescence and surface erosion

Result: Long-lasting, ultra-premium concrete sealer that extends the life of your concrete and stone surfaces while keeping a natural, non-slip appearance.

DEEPSHIELD GOLD TRANSPARENT BROCHURE PDF

DEEPSHIELD GOLD TRANSPARENT SEALER FACT SHEET PDF

Penetrating Sealer Transparent

Deepshield™ Transparent Penetrating Sealer

Premium natural-look water-based concrete sealer – up to 10 years protection

Deepshield™ Transparent Penetrating Sealer is a premium water-based penetrating/impregnating sealer for most concrete, pavers and grout. It penetrates below the surface to protect against water and oil-based contaminants, while leaving the concrete looking completely natural. Typical protection is up to 10 years, depending on surface use and weather conditions.

Ideal for:

  • Concrete driveways and garage floors
  • Outdoor paths, patios, alfresco areas and pool surrounds
  • Internal concrete floors where a natural, non-gloss finish is desired

Key benefits:

  • Invisible, natural-look concrete sealer – no change to colour or texture
  • Non-slip – does not make concrete any more or less slippery
  • Water-based, low odour, non-flammable – suitable for indoor and outdoor use
  • Fast curing – minimal downtime for concrete floors
  • Helps prevent stains, efflorescence, salt damage and moisture ingress

Result: A versatile, high-performance penetrating concrete sealer for most residential and commercial concrete surfaces.

DEEPSHIELD TRANSPARENT BROCHURE PDF

DEEPSHIELD TRANSPARENT FACT SHEET PDF

Penetrating Sealer Colour Enhancer

Deepshield™ Colour Enhancing Penetrating Sealer

Subtle colour-enhancing concrete sealer – penetrating, not a surface coating

Deepshield™ Colour Enhancing Penetrating Sealer is a specialised colour-enhancing penetrating/impregnating sealer formulated to slightly deepen and enrich the existing natural colour of concrete and other porous man-made and natural stone surfaces.

  • The colour change is intentionally slight, not dramatic.
  • It does not noticeably change whites, off-whites or pale yellows, as there is very little colour for the sealer to enhance.
  • It does not leave a shine, gloss, sheen or “wet look” coating – the surface keeps its original natural finish and texture.

Instead of creating a film, Deepshield™ Colour Enhancing Penetrating Sealer works below the surface, bringing out the natural tones and character that are already present.

Perfect for:

  • Concrete and cement-based pavers that look slightly faded or washed-out (mid- to dark-tone colours)
  • Decorative concrete, stone and masonry where you want richer, more defined colour without gloss
  • Feature areas, outdoor entertaining spaces and pool surrounds where a natural, non-slip finish must be maintained

Key benefits:

  • Slight, natural-looking colour enhancement – subtly highlights the existing colour and variation in the concrete
  • No shine, gloss, sheen or “wet look” – maintains the original, natural surface appearance and slip resistance
  • Penetrating, impregnating, water-based sealer – helps protect against water and oil-based stains while remaining breathable
  • Won’t noticeably change whites or pale yellows – ideal when you only want to gently enrich existing mid- to dark-tone colours

Result: A subtle colour-enhancing penetrating concrete sealer that brings out the natural beauty and character of suitable concrete and stone surfaces, while still providing the benefits of a breathable, impregnating, water-based sealer for long-lasting protection against water and oil stains.

DEEPSHIELD COLOUR ENHANCING SEALER BROCHURE PDF

DEEPSHIELD COLOUR ENHANCER FACT SHEET PDF

Frequently Asked Questions

+
Why seal concrete? (driveways, patios, exposed aggregate, honed or polished concrete)

Unsealed concrete absorbs water, oils and dissolved salts through microscopic capillaries. That leads to stains, efflorescence, salt attack, surface breakdown and ugly “picture framing.” A quality penetrating/impregnating concrete sealer repels water and oil, reduces staining and keeps concrete looking newer for longer—without changing the natural slip resistance or texture.
+
What’s the difference between a penetrating/impregnating sealer and a topical (acrylic/epoxy) sealer?

Penetrating/impregnating sealers soak into the substrate and bond inside the pores; they’re breathable, natural-look and non-film forming, so they don’t make surfaces glossy or slippery. Topical sealers form a surface coating that can change gloss and traction and generally need stripping before re-coating. For most driveways, paths, alfresco and pool surrounds, a penetrating, water-based concrete sealer is the low-maintenance choice.
+
Will Deepshield™ make my concrete slippery or shiny?

No. Deepshield™ penetrating sealers do not leave a surface film, so they won’t make concrete more or less slippery and won’t yellow or add shine. Natural look preserved. Suitable indoors and outdoors, including wet areas like pool surrounds.
+
Which Deepshield™ sealer should I use on concrete?

- Deepshield™ Transparent Penetrating Sealer – premium water-based, natural-look penetrating concrete sealer for most concrete, pavers and grout. Ideal for driveways, patios, paths and general concrete floors where you want protection without any visible change.

- Deepshield™ GOLD Transparent Penetrating Sealer – ultra-premium impregnating sealer for denser or more highly finished concrete (honed, burnished, polished) or when you want maximum stain resistance and longer life.

- Deepshield™ Colour Enhancing Penetrating Sealer – a slight colour-enhancing penetrating sealer that gently deepens and enriches existing mid- to dark-tone colours and brings out the natural variation in the surface.

- The colour change is intentionally slight, not dramatic.

- It does not change the colour of whites, off-whites or pale yellows (there is very little pigment to enhance in those shades).

- It does not create a shine, sheen or glossy “wet look” film – the surface stays natural in texture and gloss; only the existing colour is subtly intensified.
+
I want my concrete colour to look slightly deeper and richer without a glossy “wet look”. Which product should I use?

Use Deepshield™ Colour Enhancing Penetrating Sealer if you want your concrete or pavers to look slightly deeper and richer in colour while still keeping a natural, non-gloss finish.

- It slightly deepens and enriches existing colours and highlights the natural beauty and variation in the surface.
- It does not create a shiny, glossy, high-sheen or “wet look” coating – there is no surface film.
- It works best on mid- to dark-tone concrete and stone where there is colour to enhance.
- It will not noticeably change whites, off-whites or pale yellows, because those colours don’t have enough pigment for the sealer to enhance.

If you want a dramatic, shiny or high-gloss “wet look”, a topical coating would be required – but that’s not what Deepshield™ Colour Enhancing Penetrating Sealer is designed to do.
+
How long does Deepshield™ last on concrete?

- Transparent Penetrating Sealer: up to 10 years.
- GOLD: up to 15 years.
Actual life depends on porosity, UV exposure, traffic, maintenance and chemical exposure.
+
Is Deepshield™ food-safe for BBQ areas and outdoor kitchens?

Yes. All Deepshield™ products are non-toxic and safe for use in food preparation areas.
+
Is Deepshield™ breathable? Will it trap moisture?

Deepshield™ is a breathable penetrating/impregnating sealer. It repels liquids but does not form a vapour barrier; water under high pressure or over extended periods can still pass. If you need to stop rising damp or hydrostatic pressure, that requires a dedicated moisture barrier/waterproofing system, not a penetrating sealer.
+
Will sealing stop efflorescence and salt attack?

Penetrating sealers reduce water uptake and dissolved salt movement, which helps mitigate efflorescence and salt damage, but they can’t fix an active moisture source. Address drainage and waterproofing first, then seal.
+
Can I use Deepshield™ around pools (salt or chlorinated)?

Yes—indoors and outdoors, including pool surrounds. Because Deepshield™ sits below the surface and is breathable, it maintains the natural texture and slip resistance preferred around pools.
+
How do I know if my concrete needs sealing (or re-sealing)?

Do a water drop test: put a teaspoon of water on the surface for ~20 minutes and wipe. If a dark mark remains or water soaks in quickly, it’s time to seal or re-seal.
+
How many coats and how do I apply?

Apply liberally to saturation using a low-pressure sprayer, roller, lambswool applicator or brush. Many concrete surfaces benefit from a second “wet-on-wet” coat. For GOLD, flood coat, wait 5–20 minutes, then apply a second coat while still wet. Always test a small area first.
+
What’s the typical coverage (how many litres do I need)?

Coverage varies with porosity and finish. Typical per-coat guides:
- Transparent: ~7–13 m²/L.
- GOLD: ~7–14 m²/L.
Measure your area in m² (length × width).
+
Drying & curing time—when can I use the area?

Surfaces are typically walkable after ~4 hours; allow 24 hours for full cure and avoid getting the surface wet until cured. Heavy use may require longer.
+
Can I seal new concrete? How long should I wait after pouring?

Seal only once the slab has fully cured. Industry guidance commonly references ~28 days for concrete to reach design strength and suitable moisture levels for sealing (conditions vary).
+
Will Deepshield™ change the appearance of my concrete?

- Deepshield™ Transparent Penetrating Sealer

• Dries invisible, sealing the pores without changing the colour, texture or gloss.
• Your concrete will look the same, just better protected.

- Deepshield™ Colour Enhancing Penetrating Sealer

• Causes a slight, natural-looking deepening of existing colour on suitable surfaces.
• It brings out the existing tones and character of the concrete rather than creating an artificial finish.
• It does not add shine, gloss, sheen or a “wet look” film – the surface stays natural in texture and slip resistance.
• It will not noticeably change whites, off-whites or pale yellows, because the product can only enhance colours that already have enough pigment.

If you want zero visible change at all, choose Deepshield™ Transparent. If you want your mid- to dark-tone concrete to look very slightly richer and more defined, while still natural and non-glossy, choose Deepshield™ Colour Enhancing Penetrating Sealer.
+
Can I apply Deepshield™ over a previously sealed surface?

- If your concrete has a topical (acrylic/urethane/epoxy) coating, strip it before applying Deepshield™ (the coating blocks penetration).
- If it was previously treated with a penetrating/impregnating sealer and remains absorbent, Deepshield™ can generally be applied after a successful absorption test.
+
Will sealing prevent tyre marks or “hot-tyre pickup”?

Penetrating sealers don’t form a film, so they won’t soften or peel from hot tyres the way some topical coatings can. They reduce oil and grime absorption, making cleaning easier—but good maintenance still matters.
+
What maintenance is recommended after sealing?

Sweep regularly and clean with a pH-neutral cleaner. Avoid harsh acids/alkalis that can degrade the surface or shorten sealer life. Re-check annually with a quick water test and top up if needed.
+
Is Deepshield™ safe to use? (VOC/odour/indoors)

Water-based, non-flammable, no unpleasant odours. Suitable indoors and outdoors, including food prep areas. Ensure normal ventilation during application.
+
Can I put a topical/coating over Deepshield™ later?

Not recommended because bond and appearance can be unpredictable. If you still want a film finish, always test a small area first for adhesion and appearance.
+
Where can I buy Deepshield™ concrete sealer?

Order directly from the Deepshield™ online store for Australia-wide delivery. If you prefer a professional install, we can refer you to an accredited applicator in your area.

Delivery anywhere in Australia direct to your doorstep within 1 week.



PRODUCT CALCULATOR:

CHOOSE THE RIGHT PRODUCT FOR YOU

PRODUCT CALCULATOR
CHOOSE THE RIGHT PRODUCT FOR YOU


EFFORESCENCE PROTECTION & REMOVAL
PERTH

efflorescence protectiov and removal

Deepshield™ water-repellent deep impregnating sealer will provide protection and a reasonable lifespan to stone and masonary surfaces in areas with salt-water such as around a saltwater pool or close to a beach.

TESTIMONIALS

man_dd

“I used my sealer to seal my outdoor stone pavers, couldn’t be happier, Deepshield works like a charm.”

-James Kinsey JK Renovations

JOIN OUR MAILING LIST

Enter your email address here to receive updates and special offers about Deepshield.

JOIN OUR MAILING LIST

SURFACE TYPES