pH Neutral Cleaner (1 litre)

Deepshield® PH Neutral Cleaner is a highly efficient premium caustic free and solvent free stone and tile cleaner specially designed to provide a gentle effective cleansing without affecting sensitive stone surfaces.

Deepshield ® PH Neutral Cleaner uses special surface-active agents to penetrate and lift deeply embedded stains. Deepshield® PH Neutral Cleaner is biodegradable, non-toxic, non-flammable and ideal for everyday use.

For more info, visit: www.deepshield.com.au/Ph-Neutral-Cleaner

Description

Deepshield PH Neutral Cleaner

PH Neutral Cleaner

Recommended Surfaces

Sandstone
Marble
Granite
Limestone
Travertine
Bluestone
Slate
Natural Stone
Terracotta
Ceramic
Porcelain
Cement Pavers
Grout

PRODUCT FEATURES

pH 7 (neutral)

Biodegradable Formula
Ideal for everyday use
Safe, Neutral PH formula
Non-Caustic
Solvent Free
Non-Toxic
Does not affect sensitive surfaces
Suitable for both domestic and commercial application
Easy to use

APPLICATION

Read entire label before using.

Sweep, vacuum or dust surfaces to be cleaned.
Deepshield PH neutral cleaner can be diluted up to 50 parts water for one part solution depending on application.
Deepshield recommend using a 10 to 1 mix on floors.
Always perform a trial on a small test patch prior to application.
Apply Solution to surface with spray, mop or sponge.
Leave for up to 10 minutes, before agitating with a natural brush or scrub pad.
Do not allow solution to dry on the surface.
Remove cleaner by using a brush, a cloth, high pressure hosing or a sweeping/scrubbing machine.
Change the cleaning solution every 25 metres or as needed.
Clean tools used with water before the solution dries.

FREQUENTLY ASKED QUESTIONS

The popularity of stone and ceramic tile flooring continues to grow each year. These beautiful surfaces can be expensive, and it is important to understand the proper maintenance procedures needed to protect your investment and avoid damage.

Q: Why should I use a pH Neutral Cleaner?
A: The pH scale ranges from 0 to 14 and is used to measure how acidic or alkaline a solution is, the lower numbers correspond to highly acidic compounds, while the higher numbers correspond to highly alkaline compounds like bleach. Many natural stones are sensitive to acid, so using a cleaner that has a pH value below 7 may etch or ‘eat’ into the surface causing permanent damage and require restoration.
It is important to use the proper cleaning products on your stone or tile. Deepshield™ pH Neutral Cleaner is a powerful cleaner that will remove various types of soiling while not harming even the most delicate stone types.
It is important to avoid using acidic cleaning products or vinegar on calcium-based stones such as marble, limestone and travertine. Acids will react with the calcium in the stone and etch, or dull the surface. Etching can be reversed, but requires re-polishing, which can be pricey.
Q: Can I use Deepshield™ pH Neutral Cleaner on my marble?
A: Deepshield™ pH Neutral Cleaner is the best choice for marble as it won’t etch or damage your stone, some stone cleaners contain harsh chemicals that can etch, take the shine away and damage your marble. Marble reacts badly to anything too acidic or alkaline.
Q: How can I tell the difference between a stain and an etch mark?
A: A stain is a surface mark that can be removed with Deepshield™ pH Neutral Stone Cleaner. An etch is surface damage to your stone caused by acidic substances to unsealed stone which will require restoration.
Q: Will Deepshield™ pH Neutral Cleaner affect my sealer?
A: No, Deepshield™ pH Neutral Cleaner will not damage or remove floor sealers. Abrasive household cleaners wear away the sealer, putting your surface at risk of staining. For everyday cleaning, Deepshield™ pH Neutral Cleaner cleans with a gentle formula that effectively removes soils.
Q: Which product should I use to clean my granite?
A: Granite is known for being very strong, but some acidic products, including vinegar and lemon can cause etching while ammonia-based products can strip the sealant off the stone. Deepshield™ pH Neutral Cleaner will thoroughly clean your granite without any negative side effects.
Q: Is Deepshield™ pH Neutral Cleaner ideal for everyday use?
A: The safe formula of Deepshield™ pH Neutral Cleaner is non toxic, biodegradable and ideal for everyday use in both domestic and commercial application. When used regularly, Deepshield™ pH Neutral Cleaner prevents soap scum build up and hard water deposits. A mixture of up to 50 parts water to 1 part Neutral Cleaner is recommended for regular maintenance. The entire Deepshield™ product range has been formulated with the safety of your family and pets in mind.
Q: Is Deepshield™ pH Neutral Cleaner easy to use?
A: Yes, the solution will do most of the work. Sweep, vacuum, or dust the surface and apply Deepshield™ pH Neutral Cleaner, allow the formula to penetrate for 10 minutes before agitating with a firm brush and then rinse off any excess cleaner.
Q: How can I buy Deepshield™ products?
A: You can buy our products from our online shop, or from one of the dozens of Accredited Applicators throughout the country. Please refer to our "Online Shop" section of this website or phone or e-mail us to find out the easiest way for you to obtain our products.
Q: Is it possible to have Deepshield™ products delivered?
A: All Deepshield™ products can be conveniently delivered directly to your door.
Q: Can someone apply your products for me?
A: Deepshield™ has many trusted Accredited Applicators. You can contact these applicators independently to obtain a quote for applying our products. All listed Accredited Applicators have the required skills, training, equipment, products and experience required for applying all Deepshield™ products.
Q: How do I know if my tiles are sealed?
A: An easy way to find out if your tiles are sealed is to carry out the water test. Place a tablespoon of water on the treated surface for 20 minutes, remove the water with a tissue or cloth, pressing hard to soak up any water in the texture of the surface. If the water is absorbed or leaves a dark mark, the surface needs to be sealed, otherwise, the surface is adequately sealed and does not require further sealing.
Q: Should I dilute Deepshield™ pH Neutral Cleaner?
A: We recommend a mixture of 1 part Deepshield™ pH Neutral Cleaner to 10 parts water for stubborn areas, and a mixture of up to 50 parts water when used for regular cleaning.
Q: Will Deepshield™ pH Neutral Cleaner harm my plants?
A: As with other cleaning solutions, it is not recommended allowing Deepshield™ pH Neutral Cleaner to come into contact with plants.
Q: Can Deepshield™ pH Neutral Cleaner be used on wood?
A: Deepshield™ do not recommend our products be used on anything other than their intended purpose.
Q: I have heel marks on my floors, will Deepshield™ pH Neutral Cleaner remove them?
A: Black heel marks can generally be cleaned off using Deepshield™ pH Neutral Cleaner and gently scrubbing with a soft brush or white nylon pad.
Q: Will Deepshield™ pH Neutral Cleaner affect metal?
A: Deepshield™ pH Neutral Cleaner should not be used on aluminium as it may leave stains.
Q: Is Deepshield™ pH Neutral Cleaner flammable?
A: As the product is water based there are no flammability issues and it can be used in conjunction with any style of floor sweeping or scrubbing machinery
Q: Will Deepshield™ pH Neutral Cleaner remove grease and oil stains?
A: The special blend of surfactants creates a product capable of lifting grease and oil off most surfaces.
Q: How can I reduce the amount of required maintenance for my surfaces?
A: Surfaces will unfortunately never be entirely maintenance free, however sealing you surface using a high quality impregnating sealer can dramatically reduce the amount of maintenance required.
Q: Is Deepshield™ pH Neutral Cleaner safe for use in food preparation areas?
A: All Deepshield™ products are non-toxic and safe for use in food preparation areas.
Q: Can Deepshield™ pH Neutral Cleaner be used on ceramic or porcelain tile surfaces?
A: Yes, Deepshield™ pH Neutral Cleaner removes soiling very effectively from ceramic or porcelain tile surfaces
Q: How can hard water deposits be removed from natural stone or masonry?
A: Deepshield™ pH Neutral Cleaner is particularly recommended for surfaces with an acid sensitive substrate. Sweep, vacuum, or dust the surface and apply Deepshield™ pH Neutral Cleaner, allow the formula to penetrate for 10 minutes before agitating with a brush and then rinse off any excess cleaner. If this product is not effective, mechanical refinishing may be necessary.
Q: Can I use Deepshield™ pH Neutral Cleaner for my shower surfaces?
A: Deepshield™ pH Neutral Cleaner can be used for all shower surfaces including ceramic, porcelain, marble tiles, travertine and granite.
Q: Will Deepshield™ pH Neutral Cleaner damage my grout?
A: Deepshield™ pH Neutral Cleaner will not damage your grout. Some grout in poorer condition can become loose with excessive scrubbing.

pH Value of Common Substances

Lemon Juice 2.4
Vinegar 2.8
Orange Juice 3.0
Tomato Juice 4.0
Black Coffee 5.0
Detergent 6.5
Milk 6.8
Blood 7.2
Baking soda 9.0
Domestic Bleach 11.0
Household Ammonia 11.0

(From General Chemistry by Brady and Humiston, 1986).